Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Park Tool Vulcanizing Patch Kit
$3.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Planet Bike Floor Pump Auto Head And Hose
$10.99
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme
Specialized SWAT Mini CO2 Head
$12.00
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Silca Thread-on Schrader Chuck
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
Specialized Replacement Hose - Sport/Comp/HP
$5.00
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Serfas Combo Kit 1
$40.00
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
Specialized Air Tool Pro Pump Handle
$34.95 $50.00 30% Off
Replacement for Air Tool Pro Pump handle.
Topeak Pressure-Rite
$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Silca Hiro Side-Lever Locking Disc Chuck
$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Crank Brothers Klic Floor Pump Hose Extension Kit
$24.99
For extra length when working with a work stand. - 22-inch added hose length - Quick attachment to existing hose - Presta/Schrader head included - Clips included for easy mounting and storage
Page 1 of 1