The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)
The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty
A purpose-built carbon drop bar specifically designed to improve the off-road drop bar ride experience. Whether it’s descending the steep and technical grades at the Crusher in the Tushar, finding more comfortable hand positions during the 200-mile slog across Kansas at the Dirty Kanza, or adventure riding in your own backyard, this full carbon handlebar provides performance-driven gravel riders with the options, comfort, and control they need to grind gravel with confidence.
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)
In addition to full or partial internal cable routing, the new, lightweight Ritchey SuperLogic EvoCurve is a top-level, lightweight carbon handlebar featuring a short reach, shallow drop, and a 4-degree sweep at the ergonomic top section. Its smooth, double-radius drops afford great hand position. The no-slip grit at stem and brake lever mounting surfaces ensures confident installation, while position lines make sure levers are installed accurately and evenly. Inspired by a lifetime of experiences, the SuperLogic EvoCurve delivers exquisite performance and comfort for athletes at the highest levels of road and 'cross racing as well as more mortal riders who demand the absolute best. - Material: lightweight carbon fiber - Bend style: compact - Top style: ergonomic - Width: 400, 420, 440mm - Drop: 130mm - Reach: 80mm - Flare out: 2° - Backsweep: 4° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Cable routing: full or partial internal - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: no - Other features: Di2 cable internal routing—C260 compatible - Weight: 200g (420mm)
In addition to full or partial internal cable routing, the new Ritchey WCS Carbon EvoCurve handlebar features a short reach, shallow drop, and a 4-degree sweep at the ergonomic top section. Its smooth, double-radius drops afford great hand position, and its center section is aero bar compatible. The no-slip grit at stem and brake lever mounting surfaces ensures confident installation, while position lines make sure levers are installed accurately. Inspired by a lifetime of experiences, the WCS Carbon EvoCurve delivers top-level performance for athletes at the highest levels of road and 'cross racing as well as more mortal riders looking for excellence in all of their riding. - Material: carbon fiber - Bend style: compact - Top style: ergonomic - Drop: 130mm - Reach: 80mm - Flare out: 2° - Backsweep: 4° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Cable routing: full or partial internal - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: Di2 cable internal routing—C260 compatible - Weight: 215g (42cm)
The Carbon Streem features an extremely aggressive wing-shaped top section that saves watts while providing an incredibly comfortable hand position for cruising uphill. The drops feature a traditional bend-the choice of many Ritchey-sponsored pro riders - UCI compliant 43.5x16mm wing-shaped top section cuts through the wind - Gentle sweep to tops and broad platform-great for seated climbing - Internal cable groove-no need to tape all the way to the stem - No-slip grit at stem and brake lever clamp areas - Fully internal routing for Shimano Di2 EW-RS910 Junction box - Carbon monocoque - Compatible w/ Shimano EW-RS910 junction box/end plug + internal routing - Measured center-to-center where the levers mount - 31.8mm center section - Drop/Reach: 38cm = 130/75mm; 40, 42, 44cm = 130/80mm - Available in matte UD carbon finish - 195g (42mm)
The VentureMax is just as applicable on a cross country tour as on cross country singletrack. Intended to ride wider than typical drop bars, the VentureMax is measured at the initial bend rather than at the hood. While it boasts a number of attributes including multiple hand positions, it’s the return of the Bio-bend in the drop that adds to the signature look and feel of this bar. - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types - Bar Clamp Diameter: 31.8mm - Bar Drop: 102mm - Bar Reach: 76mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Anatomic - Cable Routing: External - Material: Carbon - Clip-on Compatible: Yes
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach
Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.
The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 780mm (cutting not recommended) - Rise: 15mm - Backsweep: 9° - Upsweep: 3° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 175g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.
The WCS Carbon Logic-E Flat bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Flat bar is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Flat bar features Ritchey's proven WCS carbon technology in a flat mountain bike bar with internal reinforcement and a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 740mm (cutting not recommended) - Rise: 5mm - Backsweep: 9° - Upsweep: 1.5° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 163g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates such as the Ritchey C220, Trail is required.
The only choice for World Champions and Olympians when it comes to wanting the best bar for XC. Ritchey SuperLogic 2x Flat bar offers crucial fit options in one bar when the high level of competition demands it. Using SuperLogic construction and advanced design philosophy, this 2x bar is perfect for those looking to dial in their race rig without sacrificing weight. - Material: lightweight carbon fiber - Width: 680 and 710mm (cutting not recommended) - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 120g
Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g
A fly-weight, modern flat bar for XC and trail riding, available with a +/- 5mm rise. The M5 bar is ENVE's lightest XC and trail bar. Designed with an offset grip position and a 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9-deg sweep with the greater width and strength that’s demanded by today’s more aggressive XC riders.
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams
For DEITY, speed motivates us in everything we do and is certainly the inspiration for the all-new Speedway Carbon DH Handlebar. Built for the most demanding and brutal conditions in the world with only one goal at hand…insane, mind-numbing speed. Not only do all DEITY carbon handlebars beat every other bar on the market in strength, they are specifically refined to allow the rider to push the limits while maintaining complete control. At 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. We've found the sweet spot that absorbs maximum vibration, chatter, and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed. - Oversized 35mm Bore Carbon Handlebar - Designed for DH / Enduro / All Mountain - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 30mm Rise - 810mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non-slip stem clamping surface - Textured grip ends for added bite - The strongest 35mm Downhill / Enduro Carbon Handlebar on the market! - Available in Matte Unidirectional Black Carbon with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - Weight: 245 grams
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology in a 15mm rise bar, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 15mm rise - 9-degree sweep - Width: 740mm - 31.8mm center section - Matte UD carbon finish - Weight: 180g
TruVativ's Noir T30 Flatbar is made from TruVativ's unidirectional SL high-modulus carbon for ultra light weight and superb strength. Plus, the wide, flat profile of the bar puts you in an aggressive position perfect for short-travel bikes and it's bar-end compatible, too.
Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g
The WCS Carbon Trail Flat +/-5mm Handlebar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29er's and other bikes with tall front ends. - +/- 5mm rise - Matte UD carbon finish - Width: 740mm - Sweep: 9 degrees - 180g
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Page 1 of 3 Next page