Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Campagnolo Pulley Assemblies - Drivetrain Speeds: 10 - Does not fit 2004-2008 Record 10 speed (carbon pulley cage)
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only
$1.80 $2.00 10% Off
Derailleur Hanger Plate with Nut and Bolt.
$2.00
- Aluminum straddle cable carrier for cantilever brake
$3.00 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
$4.25
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$4.25
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.25 - $5.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$4.99
KS Dropper Post Service Parts
$5.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
$5.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post
$5.49
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$5.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
$6.00 - $27.00
Flat Mount Disc Caliper Bracket Bolts
$6.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$7.00
KS Dropper Post Service Parts
$7.49
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
$8.00
- Grade 10 chromium steel balls
$8.00
- Grade 10 chromium steel balls
$8.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$8.99 - $12.50
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
$8.99 $12.00 25% Off
We've always had a love-hate relationship with kickstands. When they work properly, they're great—a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. Specifically designed for Specialized Roll and its 650b x 2.3" tires. Simple mounting takes the sting out of assembly. Balances your bike flawlessly.
$9.00
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$9.00
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$10.99 - $12.50
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
$10.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
$11.00
FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible
$12.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$14.00
Replacement top caps for various RockShox suspension forks.
$14.18
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$15.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers
$16.00
The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace
$16.00
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$16.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Platinum
$17.00
Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head
$17.00 - $24.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments
$17.99 - $20.85
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$17.99
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$18.38
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
$19.80 $22.00 10% Off
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing
Page 1 of 3 Next page