Your Search: "chain lube"
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD
$2.00 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$9.99 - $13.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height
$0.86 - $4.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place
$9.78 - $47.20
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.
$10.00 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$10.00 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
$69.00 - $79.00
SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius with no sharp edges or chamfers, which yield a significant reduction in noise, friction, and wear. This design also allows for a flatter plate for more consistent chain riveting and greater overall strength. It's also the biggest contributor to the ultra-smooth, precise, durable, and quiet performance found in the 10-50T cassette and X-SYNC 2 chainrings. Additionally, installation is made easy with a dedicated 12-speed Eagle quick link. - Groundbreaking new chain design and technology - The Eagle chain has been completely re-engineered and is produced with new manufacturing technology. - All-new Eagle Power Lock chain connector with FLOWLINK technology provides better chain-guiding and increased longevity - The Eagle chain is the quietest, strongest, and most wear-resistant chain in the world - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
The M7100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. - Extended inner plate improves chain engagement and retention - Reduced shift times and pedaling shock - Non-reusable - Features Shimano's SIL-TEC ultra-low friction surface treatment - Includes Shimano Quick-Link (SM-CN910-12) - This chain meets durability requirements for E-MTB applications
The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system. - HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain - Extended inner plate improves chain engagement - Reduced shift times and pedaling shock - Includes Non-reusable Shimano Quick-Link (SM-CN910-12) - Links (links): 126 - Color: Silver - Drivetrain Speeds: 12 - Weight: 252 g
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
The Shimano CN-M9100 features an extended inner link plate that connects seamlessly with chainring teeth for highly efficient drivetrain performance. Its design offers a reduction in natural vibrations normally caused by the inner and outer chain plates rolling onto the chainring. It provides better chain engagement, stronger retention, and smoother pedaling. - Enhancements to shifting performance - Easy connect - Non-reusable - Smoother driving even over bumpy terrain - Compatible with Shimano Quick Link SM-CN910-12 - This chain meets durability requirements for E-MTB applications
Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams
Page 1 of 2 Next page