Your Search: "chain lube"
$0.86 - $4.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place
With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height
- 5.5mm plug-in chain to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 9mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long
Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.
- 9mm PLUG-IN CHAIN to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 5.5mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 9mm steel chain links - 120cm long
- Ring Lock with PLUG-IN CAPABILITY - Non-Key Retaining (key can be removed from lock) - Key Retaining version available (key cannot be removed from lock while unlocked) - Includes 5.5mm plug-in chain - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include 10mm cable and 9mm chain - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long
$2.00 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$9.99 - $13.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
The KMC e12 Chain is designed for use with 12-speed eBike systems. - Features KMC's highest pin power for unsurpassed riveting geometry - KMC's Triple X durability - Double "X" bridge shape allows for precise gear shifting - This chain is eBike compatible thanks to its high torsion resistance - Outer plate chamfering allows for accurate shifting - Inner plate chamfering allows for expeditious shifting
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
Previous page Page 2 of 2