$47.00 - $55.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.
The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
$40.00 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
$4.25 - $17.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
The perfect bike fit is priceless. These FSA Polycarbonate Headset Spacers, however, are very affordable, and an easy way to dial in that fit for optimum performance and comfort.
Thermalite material molded into a guard that will protect your Sumo sprocket. Super-strong Chromoly bolts keep this thick guard in place. - Material: Stolen's Thermalite (Nylon w/Long Glass Fiber) - Thickness: 7.75mm - Sizes: Fits 25 tooth Sumo III - Colors: Black - Weight: 2.5 oz
FSA MegaExo Cartridge Bearing - 37 x 25 x 6mm
RockShox Reverb replacement main piston and shaft to freshen up or repair your beloved Reverb. - Fits A1-A2 generation externally routed Reverb seatposts - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
This kit includes all of the parts needed to replace the saddle clamp hardware on your Dual-Position Seatpost. What's in the Box: - Qty. 1 35mm Saddle Clamp Bolt (Front) - Qty. 1 30mm Saddle Clamp Bolt (Rear) - Qty. 2 Round Saddle Clamp Nuts - Qty. 2 Spherical Washers
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
The Race is, as the name suggests, oriented towards holding the rider in a narrow, speed focused position. It offers a tight radius curve intended to very closely clasp the elbows - providing good control and helping the rider to stay in a tight position. The bolt pattern yields 32 possible configurations just by moving the armrest. The Race is compatible with all current aerobars and earlier models that used the F19, F22 or F35 armrests. - Armrest Construction: Injected Nylon/Glass Fiber - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Pad Model: 5mm - Hardware: M6 x 10 FHB - Weight: 145g/pair
The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as built in tilt. It is compatible with the existing spacer kit and armrests. Compatible Aerobars - Profile Design Aeria T2 and T4 Carbon and Aluminum version - BMC TM01 TT cockpit - Parlee TTiR cockpit Non-Compatible Aerobars - Scott Plasma 5 TT4 aerobars - Please note that it must not be fitted to a Scott Plasma 5 as the bar was not designed for this style of bracket.
The 35c+ extensions offer a slightly higher rise then the orginal T4c and are half the weight - saving 12g in their uncut form. The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35c+ is a 35° bend in aluminium. Performance: The sole purpose of extensions is to provide a comfortable position for the rider's hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position, which is why we provide different fit options so each rider can chase their best performance. Fit Data: - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35c+ is a straight 35° bend. - Length: 400mm - Outer Diameter: 22.2mm - Inner Diameter: 19.4mm - Construction: Carbon - Weight: 142g/pair Tech Guide: - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips.
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Disc Brake Adaptors - Includes Stainless Bolts
$279.00 - $369.00
Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
Page 1 of 14 Next page