Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Whisky Parts Co. No. 9 36w 29-inch Rim
$450.00
No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs
DT Swiss RWS MTB Rear Thru Axle
$38.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening
Sta-Tru 700c Double Wall Rear Wheel
$69.99 - $74.99
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
WTB Rim strips
$4.95
WTB's rim strips protect your tubes from rubbing against your rim. They are simple to install and they help reduce the chance of flats caused by friction between the tube and rim.
Wheels Manufacturing Axle-13
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag
Wolf Tooth FOX Front Thru Axle
$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle
RaceFace Trace Axle
$35.00
The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard. - Light and strong alloy construction - Compatible with Race Face Trace hub
Robert Axle Project Rear Lightning Bolt-On Thru Axle
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
Quality Wheels SRAM 406 6-bolt / Sun SR25 26-inch Front
$99.00
Best value in quick-release disc wheels.
Quality Wheels SRAM 406 6-bolt / Sun SR25 26-inch Rear
$109.00
Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black
Robert Axle Project Kid Trailer Thru Axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Stolen Rampage 20-inch Front Wheel
$64.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz
Delta Axlerodz Bolt-On Skewers
$17.00
- Extra security against theft - 5mm hex CrMo axle
Evo Blade QR Skewers
$24.99
- 6061-T6 aluminum lever construction - Cr-Mo axle - Road 100mm/130mm - MTB 100mm/135mm - 110g
DT Swiss H 1900 SPLINE 30 29-inch Rear
$291.90 - $312.00
At a 30mm internal rim width, the H 1900 SPLINE 30 is what's considered the new All Mountain standard. And All Mountain it is: Without carrying too much of a weight penalty and rolling well on virtually any surface, it owns the mountain. At low pressures made possible by the wide rim and the resulting large tire volume, it finds grip where others fail, whether on loose ball-bearing climbs or root-infested off-camber gravity sections. We at DT Swiss have equipped the H 1900 SPLINE 30 to own the mountain for many years. Technologies like the patented Pro Lock mechanical nipple thread lock and meticulous wheel building technique (each signed by our pro builders) make it possible.
Wheels Manufacturing Outer Axle Nut
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$10.80 - $14.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Stan's No Tubes Arch MK4
$129.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Stan's No Tubes Baron S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
DT Swiss Standard Front Skewer
$12.00
DT Swiss Standard Front Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft
DT Swiss GR 531 Disc 700c
$115.90
You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.
WTB TCS AL 46mm Presta Valve
$26.00
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS AL 34mm Presta Valve
$25.00
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Stan's No Tubes Rim Tape
$13.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Muc-Off No Puncture Hassle Tubeless Sealant
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Enduro Max
$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
Stan's No Tubes Neo Durasync Freehub
$80.00 - $85.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Quality Wheels Shimano Deore M610 / Alex DH19 700c Rear
$119.00
Similar to the stock wheel for Surly's Long Haul Trucker.
Saris Trainer Skewer
$14.99
- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.
Page 1 of 2 Next page