Other
$20.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$23.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$29.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$59.99
Genuine replacement parts
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Details:
- Replacement cartridge units for Bontrager Line Dropper seat posts
- Be sure to use the correct size cartridge for the respective amount of travel
- Regular maintenance will help maintain performance and extend the lifespan
Campagnolo Pulley Assemblies
- Drivetrain Speeds: 10
- Does not fit 2004-2008 Record 10 speed (carbon pulley cage)
$12.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Service Kit - 3-Pawl
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6803 Bearing
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$99.00
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles
$159.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing
$25.00
Seal kits for DVO suspension forks.
- Fits Onyx DC and SC forks
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$23.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$24.00
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$5.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$11.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$15.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks.
- 26mm length
- 12g
- Designed to fit FSA cranks only
- Includes M18 bolt, M27 self-extracting cap and washers
$19.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$34.99
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$3.00
- MC bodies are bare (no guts, reservoir, lever, etc.)
- Stroker Series bodies come with bar clamp and bolts
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems
- Compact design improves performance when used on curved housing segments
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$6.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$17.00
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
$24.50
This kit includes all the parts required to rebuild your V2 Dropper Post.
- Replacement Seal
- Upper and lower bushings
- Anti-rotation pins
- Compatible with V2 Dropper Post ONLY.
$29.00
The Puget lever kits are compatible with all of our droppers, including the Cascade, Pine, Rainier, Bachelor, and Coast. These levers use a barrel nut for securing the cable and is universal with all mechanically actuated droppers from other brands. This kit includes the lever assembly, cables, housing, and barrel nut.
- 2x lever - Works on mountain bikes with all drivetrains, but is designed to play nice with front shifters
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$5.00
$7.49
33% Off
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter
$8.99 - $12.50
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$10.99 - $12.50
The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.
$14.99 - $20.85
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$24.99 - $30.25
The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.
$24.99
MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp.
- Installation hardware included
- Anodized black
- Sold each
$31.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).
$53.99
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
$15.00
$20.00
25% Off
RaceFace Aeffect R Dropper Post Small Parts.
$41.25
$55.00
25% Off
RaceFace Aeffect R Dropper Cartridge Kits.
$2.50
$5.00
50% Off
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$7.00
$10.00
30% Off
RockShox cable and hose guide.
$8.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$12.00
$19.99
40% Off
RockShox 32mm Seal Kit
$14.00
Replacement top caps for various RockShox suspension forks.
Page 1 of 3
Next page