Your Search: "chain lube"
$0.86 - $4.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$2.00 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$9.78 - $47.20
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.
$9.99 - $13.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
$10.00 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$10.00 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
Keep your drivetrain quiet while protecting your components with Squirt Dry Lube. This long-lasting wax and water-based lubricant is low maintenance and easy to apply: no degreasing is needed, just squirt it on and ride. Squirt is 100% biodegradable and doesn't contain harmful solvents. Plus, it works in all-conditions, wet or dry, for mountain and road.
Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel
$21.00 $35.00 40% Off
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
The M7100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. - Extended inner plate improves chain engagement and retention - Reduced shift times and pedaling shock - Non-reusable - Features Shimano's SIL-TEC ultra-low friction surface treatment - Includes Shimano Quick-Link (SM-CN910-12) - This chain meets durability requirements for E-MTB applications
- Unique link shape creates a lighter, quieter, stronger chain. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
- 5.5mm plug-in chain to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 9mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long
Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
$39.99 - $41.99
CN-HG701-11 Super Narrow HG-X11 Chain (11-speed) FEATURE - Directional 11-speed chain - More efficient and silent, less maintenance - MTB, Road, E-BIKE 11-speed compatible - Reinforced chain for E-BIKE use BENEFIT - Smooth and reliable shifting performance - Weight: 257g (116 Links)
The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system. - HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain - Extended inner plate improves chain engagement - Reduced shift times and pedaling shock - Includes Non-reusable Shimano Quick-Link (SM-CN910-12) - Links (links): 126 - Color: Silver - Drivetrain Speeds: 12 - Weight: 252 g
Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.
- 9mm PLUG-IN CHAIN to be used with either retractable or non-retractable ring lock - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include a 5.5mm chain and a 10mm cable - Kryptonite and AXA ring locks/plug-in options are compatible - 9mm steel chain links - 120cm long
SRAM's RED 22 11-Speed Hollow Pin Chain features hollow pins for low weight, strength, and accurate shifting in all conditions. The heavily chamfeRED outer plates improve shifting and an inner plate finish provides longer chain life. And, with its great PowerLock connecting link, installation and removal is a snap.
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
- Ring Lock with PLUG-IN CAPABILITY - Non-Key Retaining (key can be removed from lock) - Key Retaining version available (key cannot be removed from lock while unlocked) - Includes 5.5mm plug-in chain - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include 10mm cable and 9mm chain - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long
Page 1 of 2 Next page